Image Access WideTEK 48CL-600 User Manual

Perform setup
53
The "IP Address" screen is displayed.
Set network
settings:
Apply the network settings you have made
Reset to factory
settings:
Restore the factory settings
IP address:
Input field for the IP address
Gateway:
Input field for the gateway data
Subnet mask:
Entry field for the subnet mask data
IP Configuration
Method
Input/DHCP:
Assign IP address manually or automatically

Image Access WideTEK 48CL-600 Specifications

General

Brand	Image Access
Model	WideTEK 48CL-600
Category	Scanner
Language	English