Image DE 30 User Manual

Covers symbols for hot surfaces, high voltage, and operating with guards.

Covers symbols for lint cleaning, fabric drying, and rotation direction.

Covers symbols for dry cleaning hazards, 24V controls, servicing precautions, and exhaust ducting.

Provides instructions for inspecting the dryer upon delivery and handling it safely.

Outlines essential safety rules to prevent fire, explosion, injury, or property damage.

Details immediate actions to take if gas is detected, including evacuation and calling for help.

Warns against hazardous materials, lint accumulation, and proper dryer usage.

Covers steam pressure limits, hose maintenance, and crucial service safety procedures.

Provides detailed technical specifications for different dryer models, including gas, steam, and electrical data.

Presents detailed dimensional drawings and specifications for the DE30 lb. dryer model.

Presents detailed dimensional drawings and specifications for the DE50 lb. dryer model.

Presents detailed dimensional drawings and specifications for the DE75 lb. dryer model.

Identifies key components visible on the front of the DE30, 50, and 75 lb. dryer models.

Identifies key components visible on the rear of the DE30, 50, and 75 lb. dryer models.

Specifies the necessary conditions and codes that must be met for the dryer's installation location.

Provides instructions for safely unpacking the dryer and preparing it for setup.

Details the clearance and construction requirements for the dryer's enclosure.

Explains the importance and specifications for providing adequate fresh air supply to the dryer.

Details the specifications and guidelines for properly designing and installing exhaust duct work.

Outlines electrical installation responsibilities, codes, and safety precautions.

Provides detailed electrical service specifications (voltage, amp draw, wire size, breaker) for each model.

Details electrical connection requirements for gas and steam dryer models.

Details electrical connection requirements for electrically heated dryer models.

Explains the mandatory grounding requirements for dryer safety and operation.

Describes the single-phase electrical input connection for electric dryers.

Covers essential information and regulations for gas supply installation and safety.

Details gas supply requirements, codes, and safety warnings for installation.

Provides technical gas data, including pressure and nozzle sizes, for different dryer models.

Specifies requirements for gas piping, connections, and pressure regulation.

Covers steam system installation practices and precautions for safe operation.

Provides specific installation instructions for low-pressure steam systems with solenoid valves.

Provides specific installation instructions for high-pressure steam systems with motorized valves.

Lists essential checks and preparations before operating or starting the dryer.

Details the necessary tests to perform before the dryer is put into public use.

Instructs on checking the electric service phase sequence and motor rotation direction.

Provides step-by-step instructions for operating the dryer, including loading and cycle selection.

Describes the functions of each button and indicator on the dryer's control panel.

Explains how to set drying time, temperature, and humidity sensor parameters.

Details various controller settings like password, rotation, anti-crease, and temperature.

Lists common alarm messages displayed by the dryer and their corresponding causes.

Instructs on how warranty cards are processed for customer support and documentation.

Explains how to obtain a copy of the dryer's commercial warranty.

Details the procedures for returning parts for warranty claims, including authorization.

Provides guidelines for regular inspection, cleaning, and lint removal for optimal dryer performance.

Outlines periodic checks and adjustments for bolts, controls, and safety devices.

Specifies which bearings are sealed and require no lubrication.

Lists common problems and their potential causes for microprocessor-controlled dryers.

Specifies that service must be performed by qualified technicians and how to contact them.

Provides guidance on purchasing replacement parts from distributors or the factory.

Lists components and part numbers for the front panel assembly of the dryers.

Lists components and part numbers for the single-phase drive and blower motor assemblies.

Lists components and part numbers for the three-phase drive and blower motor assemblies.

Lists components and part numbers for the door and lint drawer filter unit.

Lists components and part numbers for the idler and basket assemblies.

Lists components and part numbers for the timer controller unit.

Lists components and part numbers for the rear electrical control box on steam type units.

Lists components and part numbers for the rear electrical control boxes on gas and heating type units.

Lists components and part numbers for the front electrical control boxes.

Lists components and part numbers for the thermostat unit.

Lists components and part numbers for the gas burner heating unit.

Lists components and part numbers for the electric element heating unit.

Lists components and part numbers for the steam heating unit.