IP400, IP500 & IP600 9
· Check that the flap interlock switch is functioning by metering to check that with
the flap closed, the switch contacts are made.
· Check that the truck switch is functioning by metering to check that with the
truck latched in, the contacts are made.
If difficulty persists, contact the supplier or IMC Service Desk (01978 667743).
ORDERING SPARE PARTS
In the event that spare parts or accessories need to be ordered, please always
quote the SERIES AND SERIAL NUMBER of the machine. This is to be found on
the rating plate located near the supply cable.
For installations outside the UK please contact your supplier.
For information on IMC spares and service support (if applicable), please call IMC
on +44 (0)1978 661155. Alternatively, contact us via email or fax:
IMC Service Desk Fax: +44 (0)1978 667766
E-mail: service@imco.co.uk
IMC Spares Desk Fax: +44 (0)1978 667759
E-mail: spares@imco.co.uk
To Next Page
Loading...
Need help?
General