EasyManuals Logo

IMC 5 Series User Manual

Default Icon
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
IP400, IP500 & IP600 3
INTRODUCTION
IMC Compactors are designed to reduce the bulk of waste by compression into a plastic
bag within a purpose-designed trolley. The recommended type of waste is cardboard
boxes, plastic containers, bottles, cans and dry food waste. It is important that these
recommendations are adhered to. Any other use is against the manufactures advice and
is beyond the design limitations of the unit. No legal liability can be deemed to attach to the
manufacturer in respect of such misuse or wrongful application.
GUARANTEE
Each Impactor is guaranteed by IMC for 1 Year from the date of its purchase from IMC, or
from one of its stockists, dealers or distributors. The guarantee is limited to the
replacement of faulty parts or products and excludes any consequential loss or expense
incurred by purchasers. Defects which arise from faulty installation, inadequate
maintenance, incorrect use or fair wear and tear are not covered by the guarantee.
Please observe these instructions carefully.
The guarantee applies in this form to installations within the United Kingdom. Contact your
Impactor supplier first.
RECEIVING THE UNIT / UNPACKING INSTRUCTIONS
· Prior to unpacking check that there is no transit damage.
· Stand the carton or crate on the end marked 'bottom'.
· Remove the outer carton or crate panels.
· Knock away the wooden blocks around the machine.
· Lift latch handle on the truck and pull the truck out.
· Remove all the packaging materials from inside
the truck and remove the following items:
Set of keys
User manual
Pair of truck liners
100 bags with 100 wire ties (1 box) and tie twisting tool
Truck handle - not fitted
IP500 and IP600 machines are delivered with the
truck part-assembled. To assemble the truck handle
remove the four fixing screws in the truck front. Slide
the handle in place and refit the four fixing screws.
(See fig. A)
· IP400 machines are delivered assembled with the following loose items inside the truck:
Set of keys
User manual
Pair of truck liners
100 bags with 100 wire ties (1 box) and tie twisting tool
Fig. A
Truck front Panel
Handle
Fixing Screws (2 off each side)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IMC 5 Series and is the answer not in the manual?

IMC 5 Series Specifications

General IconGeneral
BrandIMC
Model5 Series
CategoryTrash Compactor
LanguageEnglish