Section 1: Getting Started
1.1 Setting Up Your TABLET
Install the standard SIM card, battery, and optional memory card, then charge the
battery to begin using your TABLET. The battery, SIM card, and optional memory
card are installed under a removable cover on the back of the TABLET.
1.2 Removing the battery cover
Pull up using the slot provided, while lifting the cover off the TABLET.
1.3 Installing the battery cover
Align the cover and press it firmly into place, making sure it snaps into place.
Note: The battery cover is flexible, take care to avoid bending or twisting the cover
when removing and installing, to prevent damage to the cover.
1.4 SIM Card
Your TABLET uses a standard SIM card that stores your phone number, information
about your wireless service, and other information such as messages.
The SIM card is installed under the back cover, and must remain in the device when
in use.
Caution! Turn the TABLET off before installing or removing the SIM card. do not
bend or scratch the SIM card. Take care when handling, installing, or removing the
SIM card, and avoid exposing the SIM card to static electricity, water, or dirt. Keep
the SIM card out of reach of small children.
1.5 Installing the SIM Card
1. Remove the back cover.
2. With the gold pin facing up, carefully insert the SIM card into the slot, pressing
gently until it locks into place.
3. Install the back cover.
1.6 Removing the SIM Card
1. Turn off the device, and then remove the back cover.
2. Press the SIM card in gently to release the lock, and then carefully slide the SIM
card out of the slot.
3. Install the back cover.
To Next Page
Loading...
Need help?
General