iMediSync iSyncWave - Compliance Information; Electromagnetic Compatibility Declaration

Page 39 of 46
7. Compliance
7.1 Electromagnetic Compatibility-Guidance and manufacturer’s declaration
Guidance and manufacturer’s declaration – electromagnetic emissions
The ISW-MKR101 is intended for use in the electromagnetic environment specified below.
The customer or the user of the ISW-MKR101 should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The ISW-MKR101 uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
The ISW-MKR101 is suitable for use in all
establishments, including domestic establishments
and those directly connected to the public low-
voltage power supply network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies