17
CLEANING
WARNING! Make sure the plug is disconnected from the
socket and the plate has cooled down completely before
cleaning the iron.
Position the ON/OFF switch (5) to turn the product OFF.
Unplug the power supply cable with plug (7) from the socket.
Wait until the iron cools down completely.
Remove any starch deposits or residue on the surface of the plate (16) with a damp cloth and non-
abrasive liquid detergent.
Avoid scratching the plate (16) with steel wool or metal objects.
Clean plastic parts with a damp cloth.
Then wipe with a dry cloth.
STORAGE
Fold the mono-tube in half (14) with the iron resting on its stand (12) [Fig. C].
Insert the folded mono-tube into the recess (4), sliding it inside the special clamp.
Slide the mono-tube (14) along the entire cable recess (4).
Insert the mono-tube (14) behind the second clamp [Fig. D].
WARNING! Risk of fire. Wait for the appliance to cool
completely before storing it.
To Next Page
Loading...
