What to do if Imetec Zerocalc Z3 3500 not steaming?
If only a little steam or no steam at all is dispensed from your Imetec Iron, check if the steam selector is in the steam closed position and move it to the desired position. Also, ensure that there is enough water in the reservoir and fill it if necessary.
Why does my Imetec Zerocalc Z3 3500 Iron stain clothes?
If the impurities from the steam holes of your Imetec Iron stain your garments, it could be due to residues in the plate. Perform self-cleaning as described in the Calc-Clean System paragraph. Another cause may be related to the use of chemical additives, scented liquids, or descaling agents. These substances can damage the product, so avoid adding additives to the water in the reservoir. If you are using starch, make sure to always spray it on the reverse side of the fabric.
What to do if Imetec Iron leaks water?
If water leaks from the plate of your Imetec Iron, it could be because the plate temperature is too low due to pressing the super-steam button too frequently. Allow slightly longer intervals between steam jets. Another reason might be that the temperature adjustment knob is set too low. Turn the temperature adjustment knob to a position between the 3 dots and the maximum temperature.
How to fix Imetec Zerocalc Z3 3500 Iron that is not heating up?
If your Imetec Iron plate remains cold or does not heat up, first check if the power supply cable plug is correctly inserted or try another socket. Also, verify that the temperature adjustment knob is not set to the minimum temperature.
Why does the Imetec Zerocalc Z3 3500 light keep flashing?
The plate temperature LED going on and off on your Imetec Iron is a normal procedure. The LED indicates the heating phase of the iron and goes off once the set temperature is reached.
General| Water Tank Capacity | 300 ml |
|---|---|
| Soleplate Material | Ceramic |
| Type | Steam iron |
| Vertical Steam | Yes |
| Anti-Scale System | Yes |
| Self-cleaning | Yes |
| Self-Cleaning Function | Yes |
| Anti-Calc System | Yes |
| Cord Length | 2 m |
To Next Page