9
Specifically:
The appliance was designed to function with tap water, however if the local water is too calcareous, mix tap
water (50%) with distilled and/or demineralised water (50%); in coastal areas, the salt concentration in water
is very high: In these cases, “demineralised water for irons” sold on the market must be used. When in doubt,
use only demineralised water for irons.
Do not use chemical diluents, scented substances or descalers. Using such substances can damage the
product. Do not use water from dryers, air conditioning water or rainwater. The appliance may still contain
water since every product is tested before being sold. When ironing for the first time, it is advisable to put a
cloth between the iron and the fabric to be ironed. Before ironing, we advise directing a shot of steam into the
air to let off any remaining condensate.
To Next Page
Loading...
Need help?
General
