22
7.4 Flow temperature.
From the cooling function ( ), the system ow temperature
during normal operation is managed automatically by the
CAR
V2
remote control on the basis of the set room tempe-
rature. If the room probe is excluded (Para. 12.1), the ow
temperature will not be managed by the CAR
V2
remote
control but will be dened according to the parameters set
in the internal hydronic unit.
If the external temperature probe is present, the ow tem-
perature will be set according to adjustments in the internal
hydronic unit.
N.B.: modulating ow temperature operation is only present
on pre-set Immergas appliances.