Immergas CRONO 7 - Programming Functioning Time

20
7.2 Programming functioning time.
By pressing the button, it is possible to enter
the time periods programming window for programming
the room temperatures (as well as setting the current time
and day).
By pressing the + / - buttons, the items that can be set in the
menu are displayed alternately.
ere are, in fact, two types of program:
- PR RIS: room central heating program
- PR RAF: room cooling program
By following the points described below, it is possible to
create or modify the time program selected.
1) Press the
button, select the program to modify
by pressing the + / - buttons, aer which conrm by pressing
the button.
2) Select the day or group of days by pressing the + / - buttons
and conrm the selection by pressing the
button:
- Monday, Tuesday, Wednesday... Sunday (individual
day)
- Mon - Fri (from Monday to Friday)
- Sat - Sun (from Saturday to Sunday)
- Mon - Sat (from Monday to Saturday)
- Mon - Sun (from Monday to Sunday)
3) Set the functioning times with comfort and economy
temperature. Within the 24 hours it is possible to dene
a maximum of 4 time periods with Comfort temperature,
each of which is characterised by a switch-on time and a
switch-o time.
e minimum variation of the switch-on and switch-o
time is 30 minutes.
4) Set the rst functioning period with comfort temperature
(ON 1) indicated at the top and the switch-on time at the
bottom. Press the + / - buttons to modify the switch-on
time and press the
button to memorise. At this
point, pass to the next functioning period with comfort
temperature (OFF) indicated at the top and the switch-o
time at the bottom. Press the + / - buttons to modify the
switch-o time and press the button to memorise.
When the rst phase has been dened, pass automatically
to the next functioning phases at comfort and economy
temperature in order to program. is means repeating the
points described previously up to phase 4.
e sequences of the On and O states must always be
sequential. For example, it is not possible to set “OFF 2” at
13.30 and “ON 3” at 11.00.
Once the day or group of days have been programmed,
proceed in the same way for the remaining days and the
remaining programs.