Immergas CRONO 7 - VACANZ (Holiday Program); REMOTE (Telephone Control); Code; Reset of CRONO 7

23
Value System type
5 system with little heat inertia
10
system with normal dimensions with
radiators
20
system with a lot of heat inertia (e.g. oor-
standing system)
9.5 VACANZ (holiday program).
From winter functioning mode it is possible to dene a
number of days (from 1 to 99) during which the system
deactivates the room central heating function.
e value is decreased every midnight in the day change. At
the end of the days set (the meter reaches 0) the previously
active functions are restored. e activation of the holiday
function is indicated by the ashing of the
icon and the
count of the days remaining.
e holiday function can be deactivated by pressing the
button.
In the event of remote activation from telephone control, the
boiler is activated with the settings of the telephone control,
omitting the Holiday program.
N.B.: the room anti-freeze function is however guaranteed
also in holiday mode.
9.6 REMOTE (telephone control).
Allows to set the functioning of the CRONO 7 in a way
that, in the event of remote activation, it functions with
the automatic time program if set at AUTO. Vice versa, it
functions at continuous comfort temperature (without time
program) if set at ON.
In the event of activation, it displays the ashing (
) icon.
Warning: when the CRONO 7 is set on chiller function (
)
or O mode remote activation is not available.
9.7 CODE.
To use this function, see the “Functions protected by code”
chapter.
9.8 Reset of CRONO 7.
It is possible to perform 2 types of CRONO 7 reset:
- By pressing the RESET key (ref. 3 g. 6) a system reset is
performed without modication of the time and weekly
programming.
- By pressing the RESET key (ref. 3 g.6) and the ESC key
simultaneously (ref. 1 g. 6) the factory conditions are
reset.