EasyManua.ls Logo

Immergas VICTRIX 50 - General Features

Immergas VICTRIX 50
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
STV50 ed 09/08 VICTRIX 50 Rev. 002
VICTRIX 50
Condendensing wall-hung open chamber
fan assisted or room-sealed fan-assisted
boiler for central heating only
VICTRIX 50
VICTRIX 50 is a condensing wall-hung open chamber fan
assisted or room-sealed fan assisted boiler for central heating
only. With a special kit (optional) this boiler can be combined
with an external storage tank for the production of domestic
hot water with capacities of 80, 105, 120 and 200 litres.
e boiler is approved for installation both inside a heating
station and outside the building and can be installed single or
in cascade by which we mean the installation of a maximum
of 3 boilers in battery on the same system.
Special hydraulic kits are available as optionals to complete
the installation such as the ISPESL safety kit, the distribu-
tion manifold with lter kit, the 3-way diverter valve kit for
coupling the storage tank and the hydraulic manifolds kits for
connecting two or three boilers in cascade.
anks to the condensation technology, VICTRIX 50 is distin-
guished for its high operating performance and wide modula-
tion range (from 20 % to 100 % of its nominal output).
e boiler has a heat output of 50 kW (43,000 kcal/h) and
features an innovative total premix combustion system that
ensures minimal pollution emissions. It can work with natural
gas or LPG.
e appliance is regulated and controlled by means of a mi-
croprocessor controlled p.c.b. which, via a display, shows the
General features.
state of boiler operation (temperatures, safety devices, etc.). e
hydraulic circuit features a water-gas coil exchanger stainless
steel made.
All boilers are tted with an antifreeze device for temperatures
of -5 °C.
e VICTRIX 50 boiler must be installed using specic ue
kits (green series) made in plastic and especially for the VIC-
TRIX 50 boiler whether it is installed in a single conguration
or in a battery (up to a maximum of 3 boilers).
e plastic (80 mm Ø exible) ducting ue system can also be
used, designed specically for Immergas condensing boilers.
Technical Documentation
Technical Documentation

Other manuals for Immergas VICTRIX 50

Related product manuals