To Next PageTo Next PageWhat to do if Immergas VICTRIX 24 TT 1E Boiler shows maximum number of resets?
If your Immergas Boiler has reached the maximum number of reset attempts, note that the function is inhibited for at least one hour after 5 consecutive resets. You gain one attempt every hour, up to a maximum of 5 attempts. By switching the appliance off and on again, the 5 attempts are re-acquired.
What happens if my Immergas Boiler reaches the maximum number of resets?
The anomaly can be reset 5 times consecutively, after which the function is inhibited for at least one hour. One attempt is gained every hour for a maximum of 5 attempts. By switching the appliance on and off again, the 5 attempts are re-acquired.
How to fix flue safety thermostat block on Immergas VICTRIX 24 TT 1E?
To resolve a flue safety thermostat block on your Immergas Boiler, press the Reset button (1).
How to fix safety thermostat block (over-temperature) on Immergas Boiler?
To resolve a safety thermostat block (over-temperature) on your Immergas Boiler, press the Reset button (1).
How to fix no ignition block on Immergas Boiler?
To resolve a no ignition block on your Immergas Boiler, press the Reset button (1).
What to do if Immergas VICTRIX 24 TT 1E Boiler shows contacts resistance block?
If the P.C.B. detects an anomaly on the gas valve supply of your Immergas Boiler, check the connection. The boiler will not start.
What to do if my Immergas VICTRIX 24 TT 1E Boiler shows a safety thermostat block (over-temperature)?
If your Immergas Boiler displays a safety thermostat block due to over-temperature, try pressing the Reset button (1).
What should I do if my Immergas VICTRIX 24 TT 1E Boiler has a flue safety thermostat block?
If your Immergas Boiler is showing a flue safety thermostat block, try pressing the Reset button (1).
How to fix a no ignition block on my Immergas VICTRIX 24 TT 1E Boiler?
If your Immergas Boiler is experiencing a no ignition block, try pressing the Reset button (1).
What happens if there is a domestic hot water probe anomaly in my Immergas VICTRIX 24 TT 1E Boiler?
If the board detects an anomaly on the domestic hot water NTC probe, the Immergas boiler continues to produce domestic hot water but not with optimal performance (1).
General| Category | Boiler |
|---|---|
| Gas Type | Natural Gas / LPG |
| Max. Heating Output | 24 kW |
| Nominal heat output | 24 kW |
| Efficiency | 93% |
| Heat Exchanger Material | Stainless Steel |
| Control System | Electronic |
| Protection Rating | IPX5D |
| Max working pressure | 3 bar |
| NOx Class | 6 |
