Immergas VICTRIX SUPERIOR 26 - Page 72

72
INSTALLER
USERMAINTENANCE TECHNICIAN
TECHNICAL DATA
MENU / General settings
Menu item Description Range Default
Customised
value
Language Denes the remote panel operation language ITA (*)
Display
It is possible to adjust the contrast and lighting of the display. e
lighting (available on two levels) can be automatically selected as xed
or variable during the boiler operation or user access to the display
Contrast:
5
Display
lighting:
Min
Menu access level
Allows the entry of an access code to access the parameter customisa-
tion menus according to ones needs (dedicated to a qualied techni-
cian)
User factory settings Resets the user parameters to default state
(*) e display leaves the factory set in Italian. To change the display language, see Par. 2.5 in the “USER” chapter, under “Changing the
display language”.
In case the user restores the factory conditions through "Menu/General settings/User factory settings", the menu will appear in Eng-
lish. Proceed in the following way to restore the desired display language:
- Enter Menu/General setting/Language.
- Select the desired language from those available and press OK.