© IMPEX INC. www.impex-fitness.com 6
ASSEMBLY INSTRUCTION
• Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench,
provided by manufacturer.
• NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP-1
A.) Attach the Front Stabilizer (#5) to the Main Frame (#1). Secure it with two M8 x 2 3/8” Carriage Bolts
(#4), two Ø 5/8” Curved Washers (#7), and two Acorn Nuts (#8).
DIAGRAM 1
To Next Page
Loading...
