Name: Implen NanoPhotometer
Brand: Implen
Rating: 4 (1 reviews)

To Next Page

To Previous Page

NanoPhotometer

P-Class User Manual

Version 2.1 Page 23 / 70

Results Screen

Step 14 Apply/insert the reference sample. Press Blank Key. This

will be used for all subsequent samples until changed.

Step 15 Apply/insert sample and press Sample . This measures

at 260nm, 280nm, 320nm and the dye specific

wavelength and displays the result. Protein concentration

(corrected by background wavelength value if selected),

dye concentration and degree of labelling is calculated.

Step 16 If the absorbance value of the sample is not in the linear

range a “Warning message” will pop up and “Instruction”

will be displayed in the top left corner of the result screen.

Please refer 3.2 Software instructions/important

information on page 11 for further information.

Step 17 Repeat for all samples.

Step 18 Press Menu/Options to display available Options which

are described on page 8.

Step 19 Press Escape and confirm with Yes to return to the

Protein folder.

To change parameters, print or save methods press the Menu/Options button. The options menu will be opened. For

further explanation please see 2.3 Keypad and display on 6 (P 300) and 7 (P330 / P 360).

Questions and Answers:

Need help?

Do you have a question about the Implen NanoPhotometer and is the answer not in the manual?

Implen NanoPhotometer Specifications

General