Beach Mountain AS - 17 - fitness@beach-mountain.no
3-2 Assembly Steps
Two people are required to finish the assembly steps.
CAUTION!! Please follow the assembly steps exactly to avoid injury.
1. Remove motor cover from frame(B), then fix slightly Uprights(C,D) with frame by screw(a). Tighte
n screw(e) and then tighten screw(a). Pull out lower control cable inside Upright(D), then put them
otor cover back to the frame(B) and tighen with screws.
Note: To avoid damage or injury, always assemble the treadmill with two or more people, do not assemble
by yourself.
To Next Page
Loading...
