IMT Analytics FlowAnalyser Series - Approvals, Labels, and PC Requirements

Specifications
13
4
IMT Analytics AG
• IEC 1010-1 (Safety)
• EN 61326-1 (EMC)
• CAN/CSA-C22.2 No. 0-M91 (General)
• CAN/CSA-C22.2 No. 1010.1-92 (Safety)
• CAN/CSA-C22.2 No. 1010.1 B-97 (Safety)
• UL Std. No. 61010B-1. 1st Ed. (General)
The device falls under Installation Category II.
The device is classified as Pollution Degree 2.
Thedevice is notintended for useoutside a building.
The following labels and symbols can be found on FlowAnalyser:
RS232 interface (for service)
USB port (for PC communication)
SN XXXX Serial number
Caution: observe the safety instructions in the User Manual
Production date Month – Year
Earthing
Intel® Pentium® 4 2.4 GHz
(Intel® Core TM2 Duo recommended)
Microsoft® Windows® XP, Vista, 7, 8 (32 bit / 64 bit)
Microsoft® .NET Framework 3.5 or higher
128 MB RAM (512 MB recommended)
160 MB storage space on hard disk (full installation)
CD-ROM drive
Monitor 800 × 600 (1024 × 768 recommended)
4.5 Directives and approvals
4.6 Device labels and symbols
4.7 PC minimum requirements