IN-COMMAND NCSP3CM - Android Mobile Device Pairing; Scanning for Unpaired Android Devices; Confirming Bluetooth Pairing Request

NCSP3CM
20
2.3 Press Scan to start scanning for Unpaired devices.
Locate the mobile device in the Unpaired Device list.
Select the device by pressing it.
2.4 A Popup with the device name will apear on the display.
Press "Pair".
2.5 A Bluetooth Pairing request will appear on the DC and mobile device.
2.6 Press "PAIR" on the DC.
2.7 Press "Pair" on the mobile device.