Do you have a question about the In Phase IPS 247BT and is the answer not in the manual?
signal to noise ratio | > 60 dB |
---|---|
channel separation | > 50 dB (1kHz) |
frequency response | 20Hz - 20 kHz |
frequency range | 87.5-108 MHz |
---|---|
intermediate frequency | 10.7 MHz |
sensitivity | 2.8 µV |
stereo separation | 30 dB |
signal to noise ratio | 50 dB |
channel step | 50 kHz |
frequency range | 522-1620 KHz |
---|---|
intermediate frequency | 450 KHz |
usable sensitivity | 32 dBµV |
output | 350mV |
---|---|
impedance | 10k Ohm |
power supply | 12V DC (10.8-15.6V allowable) |
---|---|
speaker impedance | 4 or 8 ohm |
output power | 60W x 4CH |