Inboard M1 - TO OPERATE REMOTE

The RFLX Remote’s Ride Trigger button is a safety feature of the M1. The
Manta Drive will not spin if the Ride Trigger is NOT depressed.
To move the M1 Forward:
Press & hold the Ride Trigger, then push forward on the Throttle Control (away
from your body). You’re M1 will now move forward and continue to accelerate
as long as you have the Ride Trigger & Throttle pushed forward.
To move the M1 in Reverse:
Press & hold the Ride Trigger, then pull the Throttle Control backwards (toward
your body). Your M1 will now move in reverse and continue to accelerate as
long as you have the Ride Trigger & Throttle pulled back.
To Brake the M1:
Press & hold the Ride Trigger, then pull the Throttle Control in the opposite
direction of travel. For example, if you’re moving forward, you can brake by
pulling the throttle towards your body while holding the ride trigger.
If you’re moving forward, pull back on the Throttle Control, this will cause the
M1 to brake.
TO OPERATE REMOTE
| 12