8 9
D. Initial Setup
1. The InBody970 automatically starts booting when it is turned on. While booting, it performs a self weight calibration.
(While booting (about 5 minutes), make sure there is nothing on top of the footplate. Please do not stand on the footplate, or
place objects on the footplate.)
2. Press the [Administrator Menu] on the test standby screen.
3. Enter the administrator password to set the password. This screen will appear only once for initial password setup.
*
Be careful not to forget the password you set. If you have forgotten your password, please contact InBody Customer Service.
4. You will see ‘Setup' and ‘FAQ’ when you enter Administrator Menu.
Administrator Menu Button
Setup FAQ
To Next Page
Loading...
