Need help?Do you have a question about the INCOTEX 500F and is the answer not in the manual?
General| Type | Thermal Printer |
|---|---|
| Printing Method | Direct Thermal |
| Print Resolution | 203 dpi |
| Paper Width | 57.5 ± 0.5 mm |
| Paper Roll Diameter | 83 mm |
| Print Speed | 150 mm/sec |
| Interface | USB, RS-232 |
| Power Supply | 24 V DC |
Details printer type, display, connectivity, and memory capacity.
Guide on the initial power-on and setup sequence for the Electronic Signature Device.
Explains how to enter and operate the device in command mode for various functions.
Procedure to activate the memory card, essential for storing electronic journals.
Steps to fiscalize the device, including entering TIN and VRN of the distributor.
Details on various tests like display, keyboard, printer, and FM tests to check device functionality.
Button to start the fiscalization procedure for the ESD.
Step-by-step instructions for installing a printer, starting from Control Panel.
Steps to install the USB driver for the Incotex ESD device.
Guide for installing the ESIx86-Client or ESIx64-Client application.
Instructions for installing the 'setup_server.bat' for network functionality.
How to start the ESI application and activate it via the system tray icon.
To Next Page