10 QUICK START GUIDE INCOTEX 500F
Press at the end. The VRN is printed and press for confirmation.
'SEt' is displayed. If an error is occurs, the operation must be canceled with . For confirmation press
and . A receipt about the event is printed after recording all the necessary data on the FM.
2.2.5. Changing user’s data
To start this operation press the key . The message 'SP' is displayed. Enter the service password and
press . The ESD prints a message about the service intervention and records the event in the fiscal
memory.
The digit '1' is displayed, that corresponds to the first text line of the header message. To enter the field
press . Number 01 (1st character) and its code are displayed, /ex. 01.214 0/.
To clear the previous contents of the text line press . Up to 32 characters can be entered using their
3-digit codes shown in the table above . Press to confirm the text line. The message 'rdY' is
displayed for a while.
By using keys or different text lines can be reached in ascending or descending order. Each text
line can be changed as described, as first press to enter the field.
Note: The texts are automatically centered when printed.
Note: If an empty line is left, neither it, nor the following header lines will be printed, except the last
one (containing the TAX OFFICE ADDRESS).
When all the necessary data is entered in the header, press . The newly entered data is printed and
with a corresponding message additional confirmation is required to be executed by pressing
When confirmed, the new data is recorded in the fiscal memory (if the EFD is fiscalized) and a
message about the event is printed, including the number of header changes left.
2.2.6. Date and time setting
To start first press . The current date is displayed. Next press . The message dAtE' is displayed.
Enter the date in format DDMMYY and press . The message 't' is displayed. Enter the time in
format HHMM and press . If the EFD prints a message about additional confirmation, press
. Thee message '5P' is displayed. Enter the service password and press . The EFD prints a
message about the service intervention and records the event in the fiscal memory. The newly entered
date and time are also printed in the receipt. Press to end the operation.
2.2.7. Tests
To perform tests press in command mode.
The following tests are available by pressing the corresponding digit key:
0 – Display test
No Description Display Exit
0 Visual examination of all segments 8.8.8.8.8.8.8.8.8.8.
1 – Check sum of the EFD firmware.
No Description Exit
1 The EFD calculates and displays the check sum.
To Next Page
Loading...