17 QUICK START GUIDE INCOTEX 500F
3.5. Set connectivity parameters
Pressing this button gives opportunity to set the GPRS, Server and Dial number parameters.
GPRS:
• APN
• GPRS USER
• GGPRS PASSWORD
Server:
• IP
• PORT
• FTP USER
• FTP PASSWORD
• FTP PAT
Dial number
3.6. Set SN
After pressing this button a window appears where the Serial number of the ESD can be entered.
3.7. Fiscal Start
Pressing this button will start the fiscalization of the ESD.
3.8. Paper Feed
3.9. Exit
Pressing this button will exit the main window saving all the changes made by the operator.
SECTION 4: INSTALLING A PRINTER
To use the ESD first a “Generic / Text Only” printer should be installed on the PC. To do these follow
the steps as described.
From the “Start” menu select “Settings” and then “Control panel”.
To Next Page
Loading...