26
SAFE 10 E PLUS SMART
SAFE 10 E PLUS SMART_IM_20190905
INSTRUCTIONS FOR USE
The Safe appears to the user with its door open and ready for use.
CLOSE AND OPEN
Use the keypad code to open
1. To close the Safe the user must keep the door pressed and type on the keypad a 4 to 9 digits code followed
by the # key. This code can be composed by zero to nine digits, at user’s discretion
2. To open the Safe user just need to type the same code, again followed by the # key. While the code is
set, if a wrong digit is typed, press the * key to cancel it and insert the right code.It is possible to change
the secret code every time the safe box is unlocked
Door
Keypad
Receiver
WARNING! If the user forgets the code and the Safe is closed, or if the user leaves the room and the Safe is
closed, it is possible to open the Safe using the Owner Key, the Master Key or the mechanical key.
Use IB card to open
If the user forget the personal code and the safe box is closed, there is the possibility to open it using the
Owner Key or the Master Key proceeding as follows.
Place on the receiver the Owner Key or the Master Key; an acoustic signal (“beep”) sound and the display
show “OPEN” and the Safe is opening.
Receiver
Owner Key
Master Key (optional)
To Next Page
Loading...
Need help?
General
