EasyManua.ls Logo

Indel Webasto Marine Isotherm Built-In Series - 2. Usage Instructions; 2.1 Thermostat-controlled temperature regulation

Indel Webasto Marine Isotherm Built-In Series
230 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual
15
2. Usage instrucons
The climate class is indicated on the data plate inside the unit itself.
SN or extended temperate class (ambient temperature from 10°C to 32°C)
N or temperate class (ambient temperature from 16°C to 32°C)
ST or subtropical class (ambient temperature from 16°C to 38°C)
T or tropical class (ambient temperature from 16°C to 43°C)
2.1 Thermostat-controlled temperature regulaon
Product temperature is adjusted by turning the thermostat knob:
-Thermostat A:
1 corresponds to the highest internal temperature, 7 corresponds to the lowest
internal temperature.
-Thermostat B:
The temperature values indicated on the knob correspond to the desired average
internal temperature.
It is recommended to keep the product at a temperature of 5-6°C. Since the outside
temperature can aect the product internal temperature, it can be dicult to
maintain the desired temperature if it is exposed to heat and/or direct sunlight.
Thermostat Knob
BA

Table of Contents

Related product manuals