4
LOADING THE RACKS
LOWER RACK
For pots, lids, plates, salad
bowls, cutlery etc... Large pla-
tes and lids should ideally be
placed at the sides to avoid
interferences with the spray
arm.
(loading example for the lower rack)
CUTLERY BASKET
The basket is equipped with top
grilles for improved cutlery arrange-
ment.
The cutlery basket should be positioned only at the front of the
lower rack.
Knives and other utensils with sharp edges must be placed in the
cutlery basket with the points facing downwards or they must be
positioned horizontally in the tip-up compartments on the upper
rack.
UPPER RACK
Load delicate and light dishes:
glasses, cups, saucers, low
salad bowls.
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper basket can be adjusted: high position to
place bulky crockery in the lower basket and low position to make the
most of the tip-up compartments by creating more space upwards.
The upper rack is equipped with a Upper
Rack height adjuster (see gure), without
pressing the levers, lift it up by simply holding
the rack sides, as soon as the rack is stable
in its upper position. To restore to the lower
position, press the levers (A) at the sides of
the rack and move the basket downwards.
We strongly recommend that you do not
adjust the height of the rack when it is
loaded.
NEVER raise or lower the basket on one side only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable aps can be fold or unfold to
optimize the arrangement of crockery inside
the rack.
Wine glasses can be placed safely in the folda-
ble aps by inserting the stem of each glass
into the corresponding slots.
Depending on the model:
- to unfold the aps there is needed to slide it
up and rotate or release it from the snaps and
pull it down.
- to fold the aps there is needed to rotate it
and slide aps down or pull it up and attach
aps to the snaps.
To Next Page
Loading...
