14 of 20
Indesit Company
Service Manual UK English
Thermistor - Resistance Chart
Service Note:
"C" Column Type Hydraulics Assembly.
The top section of this assembly is
supported from above the tub roof with a
plastic twist cap and seal.
It is necessary to remove the dishwasher
worktop to gain access. Twist the cap
anticlockwise by 90 degrees to release it.
On reassembly MAKE SURE that the
circular thread protrusion on the top of the
assembly moulding locates centrally in the
hole in the tub before refitting the retaining
cap.
Stress or damage to the cap or thread protrusion can occur if it is forced before being correctly located.
Temperature
in degrees C
Resistance
in K Ohms
Temperature
in degrees C
Resistance
in K Ohms
- 40 24751.661 50 146.215
- 35 17127.169 55 117.828
- 30 12014.762 60 95.420
- 25 8524.305 65 77.718
- 20 6113.811 70 63.584
- 15 4435.437 75 52.260
- 10 3249.216 80 43.166
- 5 2403.515 85 35.808
0 1794.358 90 29.828
+ 5 1351.294 95 24.961
10 1025.870 100 20.955
15 785.018 105 17.668
20 605.252 110 14.951
25 470.000 115 12.695
30 367.480 120 10.824
35 289.186 125 9.259
40 229.014
45 182.485
Retaining Cap
and Seal
Thread
protrusion
To Next Page
Loading...
