EasyManua.ls Logo

Indesit RID60G2 - Manual Timer

Indesit RID60G2
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
GB
Clock and Minute Minder
The bleeper can be cancelled by pressing the „+”
button.
BLEEPER SOUND
To adjust the pitch of the bleeper, press the „-” button
while the bleeper is sounding.
For example:-
(a) Press the „+” button and set 10 seconds.
(b) When the bleeper sounds, press and release the
„-” button, until preferred pitch is set.
(c) Press and release the „+” button to cancel the
bleeper.
NOTE: If the sound of the bleeper appears to be
different, it is most likely that the pitch of the bleeper
has been inadvertently adjusted.
1 3.23
*Available only on certain models
Manual Timer* (ID60G1 only)
To use the timer, the buzzer must be wound up by
turning the knob one full turn clockwise; then turn it
back to the desired time so that the number of minutes
on the knob matches the reference mark on the panel.

Related product manuals