Table of contents
Preface........................................................................................................................................................................ 1
General notes..........................................................................................................................................................1
Safety Instructions...................................................................................................................................................1
Service Interval - Care activities.............................................................................................................................. 5
Maintenance Summary - Care activities..................................................................................................................6
AM012 - Check the work area door and window pane............................................................................................ 7
AM014 - Check the pressures on the machine........................................................................................................9
AM027 - Check hydraulic and lubrication systems................................................................................................ 10
AM030 - Visual inspection of all fluid lines and electrical cables........................................................................... 13
AM032 - Check pre-pressure of pressure accumulators....................................................................................... 15
AM035 - Replace the breathing filter at the filler neck of the hydraulic fluid tank....................................................17
AM043 - Check pneumatic system (visual inspection).......................................................................................... 19
AM055 - Cleaning of the machine......................................................................................................................... 22
AM060 - Swiveling synchronous: Check swivel axes.............................................................................................24
AM065 - Check Stäubli robot................................................................................................................................ 25
AM080 - Clean and lubricate chucks.....................................................................................................................26
AM095 - Check work area light (visual inspection)................................................................................................27
AM098 - Clean cooling lubricant outlet on spindle carrier......................................................................................29
AM110 - Check the window pane at the level sensor of the vacuum rotation filter.................................................31
AM123 - Check coolant.........................................................................................................................................33
AM135 - Removing clamping element holder........................................................................................................35
AM240 - Locking the spindle.................................................................................................................................38
AM290 - Clean collets and base body...................................................................................................................40
AM335 - Remove, inspect, lean and reinstall the spindle liner tubes..................................................................... 44
AM340 - Visual inspection of the fire extinguishing system................................................................................... 46
AM370 - Check gas springs on the control cabinet door, replace if necessary......................................................47
Service Interval - 1.000 Operating hours.............................................................................................................. 51
Maintenance Summary - 1.000 Operating hours...................................................................................................52
BM010 - Customer area........................................................................................................................................53
Table of contents
I
Maintenance Instructions
MS32-6.3
DIM105EN - 26.04.2022
To Next Page
