INETVU® MOBILE SYSTEM QUICK START – BEACON RECEIVER BR300L
C-COM Satellite Systems Inc. Page 18
7. Complete the Satellite Parameters, DVB Settings and Search Method. Mouse over each
selection for a detailed description. Click Finish when complete.
Satellite Parameters:
Longitude: Satellite you will be searching on
RX: Receive Polarity (Vertical or Horizontal)
LNB Power: Set to DIS if powering from the Beacon
Receiver. Ensure LNB Power Switch is turned
ON, otherwise set the appropriate power level.
LNB LO: ignore
DVB Settings: ignore
Search Method: RF Search for Beacon Receiver
Duplicate the settings for all satellites: Selecting this will duplicate parameters across all Satellite No. 0 ~ 4
To Next Page
Loading...
Need help?
General
