Infasecure CS2113 - Securing the Top Tether Strap

36
Take the Hood cover and extend the elasticated
section over the back of the Infant Carrier (refer
Figure 7).
Connect the adjustable top tether strap to the loop
tether strap by using the attachment clip (refer Figure 8).
Pull the adjuster strap to tighten the top tether strap
and remove all slack (refer Figure 9).
Step 7:
Step 8:
Step 9:
Place the excess length of webbing in the storage
pocket (refer Figure 9).
Step 9:
Placing Infant Carrier into Base
Use
Infant Seat
IMPORTANT
!
• Do not overtighten top tether strap.
• ALWAYS USE TOP TETHER STRAP.
Figure 7
Figure 8
Figure 9
To LengthenTo Tighten
PULL
PULL
TILT
PULL
Adjustable Top
Tether Strap
Loop
Tether Strap
ATTACHED
TO VEHICLE
ATTACHED
TO CARRIER
Upper
Anchor Fitting
Top Tether
Storage Pocket
STORE