ACCESSORIES
INFANT PILLOW (if tted)
The infant pillow (if tted) is designed to provide extra
comfort.
The infant pillow has an elastic backing. Slip the infant
pillow over the headrest cover. Adjust, as appropiate,
to obtain the desired t.
Step 1:
BUCKLE PAD (if tted)
SHOULDER PADS (if tted)
The buckle pad is designed to add extra
comfort for baby or child.
Position the buckle pad behind the buckle
and clip in the front. The release button
should be clearly visible.
The shoulder pad is designed to add extra
comfort for baby or child.
Separate press-studs and remove the
shoulder pads from harness
To attach shoulder pads, ensure press studs
face away from the child and re-attach.
Step 1:
Step 2:
Step 1:
PADDED INSERTS (if tted)
The padded inserts are designed to add
extra comfort for baby or child.
Position rmly back into the seating region
of the seat.
Pull the buckle & leg straps through the slot
or opening on the insert (if required) the
hook & loop attachment may be required to
be undone then re-attached.
Step 1:
Step 2:
Hook and loop
attachment
43
To Next Page
Loading...
