INFILED Wallpaper Series - Protection from Fire; Protection from Injury

3
Safety Information
PROTECTION FROM FIRE
• Provide a minimum clearance of 8.5 cm (0.39 in) around the cover at the back
of the panel base.
• Do not stick filters, masks or other materials directly onto LED modules.
• Do not modify the product in any way not described in this manual.
• Install only genuine INFiLED parts in or on the product unless an alternative is
described in this manual.
• Do not operate the product if the ambient temperature exceeds 40° C (104° F).
PROTECTION FROM INJURY
• Ensure that any structure used for support as well as all fastening and
connecting hardware can hold at least 10 times the weight of all supported
devices and equipment.
• Do not suspend panels using any other method of attachment than those
described in this manual.
• Create an installation by installing panels starting from the top and working
downwards. Disassemble an installation by removing panels at the bottom and
working upwards.
• Check that all external covers and rigging hardware are securely fastened.
• Block access below the work area and work from a stable platform whenever
installing, servicing or moving the product.
• Do not look at lit LEDs from a distance less than 40 cm (1 ft. 4 in.) without
suitable protective eyewear.
• Do not view lit LEDs with optical instruments that may concentrate the light
output.
2019
INFiLED Wallpaper User’s manual