Infineon IMC300A Series - Installing IMC300 A DFP onto Keil µVision IDE

V 1.2
page 4 of 15 2021-07-22
IMC301/302A MCU Getting Started Guide
Getting Started
2.2 Installing IMC300A DFP onto Keil µVision® IDE
1) Download Keil µVision® IDE, and the Infineon IMC300A DFP.
2) Open Keil µVision® IDE and select the “Pack Installer” as shown in Figure 2.
Figure 2 Keil µVision® IDE Pack Installer
3) The standalone pack installer should open in a separate window. Go to “File” →” Import…” and locate
the Infineon IMC300A DFP on your local file system as shown in Figure 3.
Figure 3 Keil µVision® IDE Pack Installer “Import”