Infineon IMC300A Series - Building A Project and Downloading to Flash Memory

V 1.2
page 9 of 15 2021-07-22
IMC301/302A MCU Getting Started Guide
Getting Started
Figure 9 Keil µVision® IDE JLink/JTrace Flash Download Tab
7) Finally, press “OK” twice to exit out of “options for target”.
2.4 Building A Project and Downloading to Flash Memory
8) Connect iMOTION™ Link to EVAL-M1-301F/EVAL-M3-302F or use the on-board debugger using USB
connection.
a. Please refer to the User Manual of the correlated board to connect iMOTION™ Link to MCU.
2) Open one of our use case example codes in µVision® IDE as shown in Figure 10.