Infineon IMC300A Series - Page 10

V 1.2
page 10 of 15 2021-07-22
IMC301/302A MCU Getting Started Guide
Getting Started
Figure 10 Keil µVision® IDE Open Project
3) Press F7 or click the “Build” button in the top left corner as shown in Figure 11. This should build the
source code and compile into an object file.
Figure 11 Keil µVision® IDE Build Project
4) Press F8 or click the “Load” button in the top left corner to download the object file into the MCU’s flash
memory as shown in Figure 12.