Please read the Important Notice and Warnings at the end of this document
www.infineon.com page 1 of 31 2019-12-02
Using Infineon’s radar baseboard XMC4700 and
BGT24LTR11 radar shield with Arduino
Set-up guide
About this document
Scope and purpose
This application note provides a step-by-step guide to setting up Infineon’s 24 GHz Sense2GoL Pulse radar
system platform, which is made up of the radar baseboard XMC4700 and BGT24LTR11 radar shield, making up
the hardware and software for use with the Arduino platform. This guide will then go on to show an application
example to demonstrate some of the features of this radar system platform.
Intended audience
This document is intended for anyone interested in using Infineon’s 24 GHz radar system platform with the
Arduino platform.
Related documents
Additional information can be found in the supplementary documentation provided with the Sense2GoL Pulse
Kit in the Infineon Toolbox or from www.infineon.com/24GHz:
24 GHz Radar Tools and Development Environment User Manual
Sense2GoL Pulse Software User Manual
AN 598 – BGT24LTR11 Shield (Pulsed Doppler)
AN602 – Radar Baseboard XMC4700
To Next Page
Need help?
General
