24 GHz radar tools and development environment
XENSIV™ 24 GHz radar demo boards
2 Running radar applications
• The GUI interface in Figure 21 should appear. The size of the GUI is not adaptive and may require some
adjustments to fit the screen.
• Press the START button to begin data collection.
Figure 21 Start data collection
The radar should now detect movement and display data on the GUI:
• Time and frequency plots
• Threshold can also be set, default 200
• Minimum velocity (default 0.50 km/h) and maximum velocity (default 20 km/h)
• Maximum Doppler frequency and target speed
• Direction of movement
Spectrum
Start/Stop Data
acquisition & detection
IF raw data of I
and Q channel
Threshold for target
detection
Target Approaching
or Moving Away
Indicator
Figure 22 Data display on Micrium GUI
To Next Page
Loading...
