Infinite Peripherals 216 - 1.4.1 Changing the paper roll

1. INSTALLATION AND USE
KPM210/216
41-
2
1
3
3
Horizontal
paper exit
Vertical paper exit
CROSS-SECTION VIEW
OF FRONT PANEL FROM
PAPER INFEED SIDE
20°
20°
WARNING
Before inserting the paper, make sure it is
cut cleanly.
WARNING
Make sure the paper and printer are aligned (fig.1.4 and fig. 1.5)
1.4.2 Paper load specifications
To correctly load the paper, follow the alignment instructions shown in figs.
1.4 and 1.5.
(Fig.1.4)
(Fig.1.2)
(Fig.1.3)
(Tab.A.3)
www.ipcprint.com