Infinite Peripherals 216 - 2.2 USB SERIAL INTERFACE (OPTIONAL)

2. INTERFACES
KPM210/21632-

!
"
2.2 USB SERIAL INTERFACE (OPTIONAL)
Printers with USB serial interface conform to USB 1.0 standards and have
the following specifications:
• Communication speed 12 Mbit/sec
• “Receptacle series B”-type connector.
Refer to the table below for the connector pin signals and connection to a
device:
NIPNIP
NIP
NIPNIPLANGISLANGIS
LANGIS
LANGISLANGISNOITPIRCSEDNOITPIRCSED
NOITPIRCSED
NOITPIRCSEDNOITPIRCSED
11
1
11
SUBV.C.N
22
2
22
-D-ataD
33
3
33
+D+ataD
44
4
44
DNGlangisdnuorG
llehSllehS
llehS
llehSllehS
dleihSdleihselbaC
Fig. 2.4 illustrates USB interface connector pin layout:
(Tab.2.2)
(Fig.2.4)
www.ipcprint.com