3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM210/216
393-
[Description] Turns white/black reverse printing mode on or off.
• When the LSB of n is 0, white/black reverse printing is
turned off.
• When the LSB of n is 1, white/black reverse printing is
turned on.
[Notes] • Only the LSB di n is effective.
• This command is available for both built-in and user-defined
characters.
• This command does not affect bit image, downloaded bit
image, bar code, HRI characters and spacing skipped by HT,
ESC $ and ESC \.
• This command does not affect white space between lines.
• White/black reverse mode has a higher priority than under-
line mode. Even if underline mode is on, it will be disabled
(but not cancelled) when white/black reverse mode is se-
lected.
[Default] n = 0
[Reference]
[Example]
mn0CSGmn0CSG
mn0CSG
mn0CSGmn0CSG
[Name] Select counter print mode
[Format] ASCII GS C 0 n m
Hex 1D 43 30 n m
Decimal 29 67 48 n m
[Range] 0 ≤ n ≤ 5
m = 0, 1, 2, 48, 49, 50
[Description] Selects a print mode for the serial number counter.
• n specifies the number of digits to be printed as follows:
when n = 0, the printer prints the actual digits indicated by the
numeric value.
when n = 1 to 5, the command sets the number of digits to
be printed.
• m specifies the printing position within the entire range of
printed digits as follows:
www.ipcprint.com
To Next Page
Loading...