3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM210/216
413-
[aL + (aH × 256)] and the maximum value is [bL + (bH ×
256)].
• Setting the count-down mode, the maximum counter value
is [aL + (aH × 256)] and the minimum value is [bL + (bH ×
256)]. If the counting down reaches a value less than the
minimum, it resets to the maximum value.
• When this command is executed, the internal count that
indicates the repetition number specified by r is cleared.
[Default] aL = 1, aH = 0, bL = 255, bH = 255, n = 1, r = 1
[Reference] GS C 0, GS C 2, GS C ;, GS c
[Example]
HnLn2CSGHnLn2CSG
HnLn2CSG
HnLn2CSGHnLn2CSG
[Name] Set counter
[Format] ASCII GS C 2 nL nH
Hex 1D 43 32 nL nH
Decimal 29 67 50 nL nH
[Range] 0 ≤ nL, nH ≤ 255
[Description] Sets the serial number counter value.
• nL and nH determine the value of the serial number counter
set by [nL + (nH × 256)].
[Notes] • In count-up mode, if the counter value specified by this
command goes out of the counter operation range specified
by GS C 1 or GS C ; it is forced to convert to the minimum
value through GS c.
• In count-down mode, if the counter value specified by this
command goes out of the counter operation range specified
by GS C 1 or GS C ; it is forced to convert to the maximum
value through GS c.
[Default] nL = 1, nH = 0
[Reference] GS C 0, GS C 1, GS C ;, GS c
[Example]
www.ipcprint.com
To Next Page
Loading...