3. PRINTER FUNCTIONS
KPM210/216
623-
SGSG
SG
SGSG µµ
µ
µµ LnHnLnHn
LnHn
LnHnLnHn
[Name] Virtual paper-end limit
[Format] ASCII GS µ nH nL
Hex 1D E6 nH nL
Decimal 29 230 nH nL
[Range] 0 ≤ nH ≤ 255
0 ≤ nL ≤ 255
[Description] This command sets the limit after which is pointed out the
virtual paper-end.
[Notes] • The calculation limit of the near paper-end is in centimetres.
• This value is expressed as [(nH x 256)+nL]
[Default] nH = 0x04
nL = 0xB0
[Reference]
[Example] If you want that the virtual paper-end is pointed out after 15
metres from first near paper-end data acquisition, you have to
convert 15 metres in 1500 centimetres, and after you have to
calculate nH and nL as it follows:
nH = 1500 / 256 = 5
nL = 1500 - (nH x 256) = 1500 - (5 x 256) = 220
And which the command will be:
Hex: 1D E6 05 DC
Decimal: 29 230 5 220
n-SGn-SG
n-SG
n-SGn-SG
[Name] Set printing speed andcurrent consumption.
[Format] ASCII GS - n
Hex 1D F0 n
Decimal 29 240 n
[Range] 0 ≤ n ≤ 2
[Description] Sets printing speed and current consumption in printing.
n specifies the printing speed and the absorption as follows:
(Tab.A.3)
www.ipcprint.com
To Next Page
Loading...