Connections
Method 1
Figure 2.
The Infinity Kappa Subwoofer offers unprecedented flexibility for connecting the
system to any type of audio or home-theater system.
Consult the table below to determine which system description most closely matches
your own, then follow the hook-up method corresponding to that system. Never
connect both speaker and line input Simultaneously. If none of these system
configurations seem to match yours, consult your dealer or Infinity customer service
for direction on how best to hook up your system.
It is essential, to enable the RABOS system to work optimally, to direct all bass in the
system to the Kappa subwoofer by setting all main speakers to SMALL, even if you are
using main speakers that reproduce frequencies below 100Hz.
Connection method 1 should ONLY be used when other options do not exist.
1. Loosen terminals
2. Insert bare end, tighten terminals
System Type Connection Methods
2-Channel receiver or integrated amplifier that has no
subwoofer output or Pre-out/Main-In connectors 1
2-Channel receiver or integrated amplifier with preamp
output and input connectors 2
2-Channel system with separate preamplifier and power amplifier 2
Dolby Pro Logic with THX, Dolby Digital, or DTS
®
receiver/
processor with a filtered subwoofer (or LFE) output connector 3
2 channel receiver or integrated amp with a sub output and
with no input connector 3
To Next Page
Loading...
