Infinity MODULUS - Safety Precautions; General Safety Guidelines

MODULUS SUBWOOFER SPECIFICATIONS
Frequency Response: 22 - 200 Hz
Crossover Frequency:
High Pass: 22Hz and 35 Hz, 12 dB per octave
Low Pass: 50 - 200 Hz (Continuously Variable, 12dB per octave)
Output Power: 250 Watts (RMS)
Driver: 12" IMG Woofer w/ accelerometer - (2 Ohm DCR)
Inputs (to ECU): Line Level (from Electronic Control Unit)
Outputs (from ECU): 6 dB per octave passive filter for satellite amplifier
Servo Control System Motional feedback, accelerometer controlled
Dimensions: 19 17 ½ X 17 12" (H x W x D)
(483 x 444 x 444mm)
MODULUS ECU SPECIFICATIONS
CONTROL PARAMETERS:
Crossover: Full CW
Phase: 0 degrees
Level: Full CW
Switch: 22 Hz
BOTH CHANNELS DRIVEN UNLESS OTHERWISE SPECIFIED
Max Vin: 5.0 volts (One channel)
8.0 volts (Both channels)
Note: Higher input voltages can be achieved with lower "level" control (knob) levels
Max Vout: 5.0 volts (One channel driven)
8.0 volts (Both channels driven)
Gain @ 70 Hz: 0 dB (none)
Input Sens.: 500µV — 8.0 volts
Zinput: 70KW
Zoutput: 260W
S/N Ratio: —124 dB
THD+N
20 Hz — 200 Hz: less than .002%
200 — 800 Hz: less than .01%
2
Modulus