Need help?Do you have a question about the Infinity Reference 1600A and is the answer not in the manual?
General| Brand | Infinity |
|---|---|
| Model | Reference 1600A |
| Category | Car Amplifier |
| Language | English |
Covers power output, signal-to-noise ratio, dynamic power, and damping factor.
Details frequency response, maximum input signal, and sensitivity.
Includes amplifier dimensions and fuse rating for protection.
Details the primary external packaging and internal protective bags.
Describes cushioning material and the owner's manual inclusion.
Lists items included in the accessory kit, such as screws and fuses.
Diagram illustrating how to connect subwoofers or voice coils in series.
Diagram showing how to connect subwoofers or voice coils in parallel.
Guidance on setting crossover frequencies and mode switches.
Instructions for setting input levels and installing the remote control.
Details on bass boost adjustment and common troubleshooting tips.
Visual representation of the amplifier's parts for identification.
Identification of major structural components like covers and heatsinks.
Details on main PCB, LED PCB, and associated lenses.
Differentiates top cover revisions by part number and serial range.
Sections handling audio input signals and gain adjustment.
Diagrammatic representation of crossover and bass boost circuits.
Illustrates the primary power amplification and speaker output stages.
Lists resistors and capacitors for the main circuit board.
Specific lists of carbon and metalfilm resistors on the main board.
Lists potentiometers found on the main board.
Lists semiconductors used on the main board.
Other parts like transformers and switches on the main board.
Resistors used on the signal processing board.
Capacitors and semiconductors for the signal board.
Other signal board parts and mechanical hardware.
Pin configurations for operational amplifiers and PWM controllers.
Pin configurations for optocouplers and rectifiers.
Pin configurations for MOSFETs and transistors.
Pin configurations for timer and comparator ICs.
Schematics for RCA, RJ45 inputs and speaker outputs.
Diagrams of power regulation and PWM control.
Schematics for amplifier core and driver circuits.
Detailed diagrams of the final output stage.
To Next Page
