InfiRay Outdoor • AFFO Series • Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Video Recording
⚫ On the home screen, press and hold the Down (3) button to start the
video recording function.
⚫ Then, the recording timer in
the format of the HH: MM:
SS (hour: minute: second)
will appear on the upper right
of the display.
⚫ During recording, it is
supported to take a photo with a short press of the Down (3) button. Of
course, the other operations to the device are supported during
recording.
⚫ Press and hold the Down (3) button again to stop and save the video
recording.
⚫ All videos and photos will be saved in the build-in storage.
Memory Access
When the device is turned on and connected to a computer, it is
recognized by the computer as a flash memory card, which is used to
access the device's memory and make copies of pictures and videos.
⚫ Connect the device to a computer through the Type C data cable.
⚫ Power on the device for operation, and the USB function box pops up
on the screen.
- Only for charging: If you select this option, you can power the
device through the
computer and charge
the built-in battery pack
at the same time.
- Data reading: Select
this option, you can view
the recorded videos and
photos on the computer and charge the built-in battery pack at the
same time.
- USB debugging: Select this option, you can update the device
program through the host computer and charge the built-in battery
pack at the same time.
⚫ Select the Data reading option by the Up (5) / Down (3) button, and
confirm the selection with a short press of the M (4) button.
⚫ Double click “my computer” on the computer desktop - select the USB
flash disk and double click to access the memory space.
To Next Page
Loading...
